3G Universal Cellular Wireless Alarm Communicator 3GRF 3G -ADT ADT DSC GSM 3G Universal Cellular Backup Wireless Alarm Communicator. The DSC 3G universal wireless alarm communicator uses the HSPA 3G cellular network to transmit signals has been discontinued. The DSC’s 3G has. GSVAH Sealed Lead Acid Alarm Battery for the DSC 3G cellular 3G alarm DSC Wireless Cellular 3G GSM Alarm Communicator (3G).
|Published (Last):||3 May 2008|
|PDF File Size:||6.21 Mb|
|ePub File Size:||17.31 Mb|
|Price:||Free* [*Free Regsitration Required]|
After the 3G generates a Kiss-off signal, it sends the next alarm or, if no further alarms need to be sent, the control panel goes on-hook. Electrical current drawn from this terminal is drawn directly from the power supply.
Products not covered by this warranty, or other The 3G has four open collector outputs capable of a maximum of 50mA. Access cards or tags returned for replace- purchase, the product shall be free of defects in materials ment under warranty will be credited or replaced at DSC’s and workmanship under normal use.
Comments to this Manuals Your Name. Description 4 hours standby power capabilities. Page 17 – 24h Test Transmission must be enabled on the dialler and on the 3G When powering the 3G Radio by an Don’t have an account? Page 22 This equipment generates and uses radio frequency energy the end user.
DSC HSPA 3g Universal Cellular Alarm Communicator 3g3070
During the warranty option. Page 13 3G low battery trouble one flash and an insufficient signal strength trouble four flashes are present; the red light will flash one time.
Internal events on the 3G can trigger the outputs to turn on an LED or activate an input on the host panel. Once the 3G low battery trouble condition is corrected, the red light will then begin flashing four times.
DSC HSPA 3g Universal Cellular Alarm Communicator 3g | eBay
Jumper JP3 does not limit the electrical current available on this output. Internal wiring must be routed in a manner that prevents: Page of 23 Go. Page 23 Access cards or tags returned for replace- purchase, the product shall be free of defects in materials ment under warranty will be credited or replaced at Ds and workmanship under normal use.
By pressing ‘print’ button you will print only current page. Table of Contents Add to my manuals Add.
The 3G will not show signal strength until the SIM is active. Outputs The 3G has four open collector outputs capable of a maximum of 50mA. This manual contains information on limitations regarding product. The 3G indicates the status of the highest priority, unrestored trouble condition with the corresponding number of flashes of the red LED. The entire manual should be carefully read. To print the manual completely, please, download it.
This must be added to the 3G current when determining the total draw on the host panel or power supply. YELLOW light will flash one time when the signal is transmitted and two times when it gets gzm kiss-off. When turned on, the 3G checks for the trouble conditions to be restored in the order listed below.
HSPA (3G) Universal Cellular Alarm Communicator – 3G Security Products | DSC
Table Of Contents Installing the 3G This equipment generates and uses radio frequency energy the end user. If this LED flashes, the following list indicates the specific trouble based on the number of flashes, by priority.
This manual contains information on limitations regarding product use and function and information on the limitations as to liability of the manu- facturer. Don’t show me this message again. DSC Software purchased with or without Products and Components is copyrighted and is purchased under the following license terms: Enter text from picture: Got it, continue to print. Also See for 3G Installation manual – vsc pages.