Interface Shear Instructions: ASTM D OR. ASTM D 1. Test Type. Isolated Interface. Multiple Interfaces (“floating”) – skip to “3” below. 2. Shear Plane. ASTM D/DM: Standard Test Method for Determining the Shear Strength of Soil-Geosynthetic and Geosynthetic-Geosynthetic Interfaces by Direct . ASTM D/DM Standard Test Method for Determining the Shear Strength of Soil-Geosynthetic and Geosynthetic-Geosynthetic.
|Published (Last):||13 August 2015|
|PDF File Size:||6.84 Mb|
|ePub File Size:||19.95 Mb|
|Price:||Free* [*Free Regsitration Required]|
Every effort should be made to identify, as closely as practicable, the sheared area and failure mode of the specimen. In cases of dispute, comparative tests to determine whether a statistical bias exists among laboratories may be advisable.
For Individuals with needing special assistance for disabilities or limited English proficiency Please contact our Title VI specialist at The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other.
The normal loads used typically at least three normally represent design conditions. Geosynthetic testing Back to Results Print. The determined value may be a function of the applied normal stress, material characteristics for example, of the geosyntheticsoil properties, size of sample, moisture content, drainage conditions, displacement rate, magnitude of displacement, and other parameters.
The total shear resistance d53321 be a combination of sliding, rolling, and interlocking of material components. Link to Active This link will always route to the current Active version of the standard. For more information, contact: Results obtained from this method may be limited in their applicability to the specific conditions considered in the testing.
Referenced Documents purchase separately The documents listed below are referenced within the subject standard but are not provided as part of the standard. The geosynthetic and other material is placed within a large-scale direct shear asrm with an applied normal load on top. A shear force is applied to the apparatus such that one section of the box is moved in relation to the other.
ASTM D Archives | Geosynthetica: Geosynthetics Engineering
The shear force is recorded with respect to displacement. The peak and post-peak shear stresses are plotted against the applied normal stresses.
In the case of acceptance testing requiring the use of soil, the user ast furnish the soil sample, soil parameters, and direct shear test parameters. Care should be taken, including close aztm inspection of the specimen after testing, to ensure that the testing conditions are representative of those being investigated.
It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Request Quote Client Login.
The y-intercept of the straight line is the adhesion.
The user of results from this test method is cautioned that results at a specified displacement may not be reproducible across laboratories and that the relative shear displacement measured adtm this test at peak strength may not match relative shear displacement at peak strength in a field condition.
Historical Version s – view previous versions of standard.
The method of test data interpretation for purposes of acceptance should be mutually agreed to by the users of this test method. Geosynthetic testing Lab Services: Combining values from the two systems may result in nonconformance with the standard. Testing under this test method should be performed by laboratories qualified in the direct shear testing of soils and meeting the requirements of Practice Despecially since the test results may depend on site-specific and test conditions.
The test specimens and conditions, including normal stresses, are generally selected by the user. Shear resistance between a geosynthetic and a soil, or a geosynthetic and another geosynthetic is measured. The test data are presented by a best fit straight line whose slope is the coefficient of friction between the two materials where the shearing occurred.