Advanced Melt Flow System. The 6MPCA is the most advanced digital model offered within the Ray-Ran range of melt flow index testers. The operating. Find the most up-to-date version of ASTM D at Engineering ASTM D(). Standard Test Method for Flow Rates for Poly(Vinyl Chloride) with Molecular Structural Implications. standard by ASTM.
|Published (Last):||21 May 2012|
|PDF File Size:||11.14 Mb|
|ePub File Size:||12.34 Mb|
|Price:||Free* [*Free Regsitration Required]|
A negative instability indicates either a degradation of the polymer or a change in the lubricant function at the metal surface of the die. Description Contact Us This test method is used for quality-control tests on PVC compounds that have a wide range of melt viscosities. Thus, this test is able to detect and follow profound changes which occur during extrusion, injection molding, milling, or mixing.
Precision d33364 Bias Link to Active This link will always route to the current Active version of the standard. These changes are asm to three types of measured instability in polymers:.
Most regulators designed for Test Method D cannot control better than Since Q is the volumetric? Note 1—There is s3364 known ISO equivalent to this standard.
ASTMD Standard Test Method for Poly(Vinyl ride) with Molecular Structural Implications_百度文库
3d364 The values given in parentheses are mathematical conversions to inch-pound units that are provided for information only and are not considered standard. For PVC, N varies from 0. Thus, this test is able to detect and follow profound changes which occur during extrusion, injection molding, milling, or mixing. However, as a one-point measure of flow relative to shear rate, its one drawback is that the same PVC melt flow values can be obtained for materials having different processibility; the chance of this happening is minimized, however, if the compounds are similar sstm composition.
Software for Series Systems. However, as a one-point measure of? Subscribe to Instron News!
ASTM D3364 Flow Rates for Poly Vinyl Chloride
Current edition approved March 10, The sensitivity of this test method makes it useful for correlating with processing conditions and as an aid in predicting changes in processing. This test is able to detect and follow profound changes, which occur during extrusion, injection molding, milling, or mixing, that are due to three types of measured instability in polymers, including Thermal instability due to temperature effect, Shear instability due to breaking of polymer bonds, and Atsm instability due to adtm distributions of widely different viscosity or molecular weight elements.
The entire time of charging and positioning of weights should take no longer than 1 min and preferably less than 1? This means that the? Under these conditions, average the values after discarding the? At x3364 twice a day check the ori?
A number in parentheses indicates the year of last reapproval. Referenced Documents purchase separately The documents listed below are referenced within the subject standard but are not provided as part of d334 standard.
Bluehill LE for Basic Testing. Glossary of Materials Testing Terms.
ASTM D3364 – 99(2011)
Your comments are invited either for revision of this standard or for additional standards and should be addressed to ASTM International Headquarters. This test is specific to the measurement of Melt Flow Rates MFR or MFI of poly vinyl chloride compounds while detecting and controlling various polymer instabilities associated with the flow rate.
It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Concrete, Asphalt and Rock. The quantity of material introduced into the barrel is 2.
Dry off the cooled die with a cloth and inspect to see that the ori? Current research for multiweight testing has reached levels of 50 kg and these are particularly good for rigid PVC.
The value for the instability will then be positive or negative.
ASTM D Flow Rates for Poly Vinyl Chloride – Instron
This test method is used for quality-control tests on PVC compounds that have a wide range of melt viscosities. The measured MFR value was found equal to 7.
WaveMatrix 2 for Dynamic Testing. The sensitivity of the material to temperature necessitates slightly tighter controls than those stated in Test Method D This standard is subject to revision at any time by the responsible technical committee and must be reviewed every?
Email addresses must contain the symbol. If you feel that your comments have not received a fair hearing you should make your views known to the ASTM Committee on Standards, at the address shown below.
How can we help you? A superscript epsilon e indicates an editorial change since the last revision or reapproval. When charging is complete, pack down the PVC with the phenolic-coated charging tool by repeated thrusts.
Be careful not to squeeze the specimen; the specimen should? This test method zstm useful for quality-control tests on PVC compounds having a wide range of melt viscosities.
Rheological instability due to nonuniform c3364 of widely different viscosity or molecular weight elements.
These changes are due to three types of measured instability in polymers: